Small Beverage Cooler And Warmer Constant Temperature 146 X 108 X
The TP202 beverage cooler and warmer is operated by a reversible
thermo-electric heat pump, the Peltier module, which is
automatically regulated by an internal temperature regulator. The
internal CPU regulates temperature by comparing the thermistor
sensor value with 5 temperature values stored in memory. The device
is able to hold cans, bottles of up to 500 ml, which includes most
standard soft drink cans and small wine bottles. The diameter, 75
mm, is large enough to hold a 1 liter carton of milk, juice or soft
By confining the energy source in a small space, the cooling and
heating process is much faster than most mini fridges using Peltier
modules. And thus it is most suitable for maintaining a constant
temperature. For example, it can be used to keep the temperature of
a bottle of white constant at the ideal temperature of 7oC (45 oF) over the course of a long meal. However, it still takes a
relatively long time to cool down or warm up beverages from a hot
or cold environment. The included flat top cap is used to cover the
can or bottle at a suitable height to ensure more effective
temperature control. Furthermore, the TP202 can also be used to
1. Fast cooling for mini bottle or can up to 500C.C.
2. Low temperature limit to prevent freezing.
3. Constant high termperature control at 50 degree celcius for
4. Indicator light blinks when temperature are reached.
5. Low noise long life brushless fan.
6. Transparent cover for tall bottle or can .
7. Switching power supply supplied suitable for all countires.
8. Optional multi-temperature setting
Rapid temperature change
All drinks at the perfect temperature
Enhances the flavor and enjoyment
Pre-set temperature for wines, soda, beer , milk or coffee
No ice or water
Thermo-electric peltier technology
76mm diameter pocket , uses the aluminum tumbler for any bottles
larger in diameter
Indicator light blinks when temperatures are reached
Low noise long-life brushless fan
Ac adapter included(input:100-240V AC/output: 12V DC 300mA
If the beverage can is small, place it towards the back of the
machine where the Peltier module is situated, to allow for more
Do not pour any fluid directly into the aluminum cavity as it may
corrode. All liquid must be in a container.
50oC is the most suitable temperature for making yogurt. A
stainless steel container should be used to hold the milk.
Remove all the items from the package. Plug the figure-8 end of the
mains cable into the switching mode adaptor’s figure-8 socket, and
the front of the mains cable into an A.C. mains socket. Connect the
D.C. output round plug to the socket at the back of the unit.
After installation, press gently the ON/OFF switch at the left side
to switch the power ON. The temperature is pre-set to 3oC. Use the
selector on the right side to choose one of five desired
temperatures, as indicated by one of five LEDS. Place the bottle,
can or carton, into the aluminum cavity.
When the selected temperature is reached, the steady indicating
light will begin to blink. The temperature selected will be
maintained automatically through cooling and warming of the
Press the ON/OFF switch again to switch the power OFF.